TAMINA & TAMINA TF
3.5mm Proximal Humerus System

TAMINA & TAMINA TF

3.5mm Proximal Humerus System

THE TAMINA TF 3.5MM PROXIMAL HUMERUS PLATE

1

2

3

4

5

6

7

TUBERCULAR ARMS

For the greater and lesser tuberosity

SUTURE HOLES

For attachment of sutures

CALCAR VA-SCREW HOLES

Using the TIC™ variable angle locking technology

KIRSCHNER WIRE HOLES

For preliminary plate fixation

PRECONTOURED SHAPE

To adjust for valgus deformation

OBLONG HOLE

Allowing precise positioning of the plate

TIC HOLES

Variable angle locking holes (15° angulation)

THE TAMINA / TAMINA LONG

THE TAMINA TF (US Patent 11,529,177)

3 Hole | 87mm length

3 Hole | 87mm length

5 Hole | 117mm length

5 Hole | 117mm length

“The TAMINA TF Proximal Humerus Plate is not just another angular stable implant, rather it introduces a new concept for the treatment of complex proximal humerus fractures. The tubercular arms allow an ideal positioning of the polyaxial screws in relation to the lesser and greater tuberosities as well as to the humeral head. In our experience, this increases the stability of the reconstruction and thus the probability of success in these challenging fractures.”

Alex Schallberger, MD

Head of the Department of Orthopaedics,

Nidwalden Hospital, Stans, Switzerland

Tamina Bridge

DIRECT TUBEROSITY FIXATION

src

The TAMINA TF (Tubercular Fixation) Plate offers an improved approach to ORIF of three- and four-part proximal humerus fractures. The plate is designed to allow for direct stabilization of the head fragment and both tuberosities. The anatomically designed arms for the lesser and greater tuberosity assist in accuracy of reduction, allow for direct tuberosity fixation as well as the creation of a multiplanar screw construct for retention of the fracture reduction.

OPTIMIZED SHAPE

src

The plate offers a varus-avoiding shaft-metaphysis design to prevent secondary varus dislocation of the humeral head. Furthermore, all holes enable variable angle screw positioning, permitting tailored placement of all screws depending on the specific fracture pattern.

SIMPLE AND STANDARD

src

In addition to the TAMINA TF, the TAMINA is a versatile standard plate for open reduction and internal fixation of simple proximal humerus fractures.

THE TAMINA 3.5MM INSTRUMENT SET

TORQUE LIMITING SCREWDRIVER HANDLE 3.5MMPOWER TOOL TL ATTACHMENT 3.5MMEXCHANGEABLE BIT 3.5MM, 100MMEXCHANGEABLE BIT 3.5MM, 180MMDRILL BIT 2.8MM, 120MMDRILL BIT 2.8MM, 220MMK-WIRE 1.8MM, 250MMDEPTH GAUGE 3.5MMDRILL GUIDE 3.5MMMONOAXIAL DRILL GUIDE 3.5MMBENDING STICK 3.5MMPROTECTION SLEEVE 3.5MMPROTECTION SLEEVE DRILL INSERT 3.5MM
TORQUE LIMITING SCREWDRIVER HANDLE 3.5MM WITH TAMINA

TORQUE LIMITING SCREWDRIVER HANDLE 3.5MM

Provides a tactile and audible ‘click’ to confirm final tightening of VA Locking screws 3.5mm.

3.5MM SCREWS

VA Screw
Cortical Screw

MORE BONEBRIDGE PRODUCTS